<< Back to shouce.jb51.net

Chapter 2. Kickstart Configurator

Kickstart Configurator allows you to create or modify a kickstart file using a graphical user interface, so that you do not have to remember the correct syntax of the file.

To use Kickstart Configurator, you must be running the X Window System. To start Kickstart Configurator, select Applications (the main menu on the panel) => System Tools => Kickstart, or type the command /usr/sbin/system-config-kickstart.

As you are creating a kickstart file, you can select File => Preview at any time to review your current selections.

To start with an existing kickstart file, select File => Open and select the existing file.

2.1. Basic Configuration

Figure 2-1. Basic Configuration

Choose the language to use during the installation and as the default language to be used after installation from the Default Language menu.

Select the system keyboard type from the Keyboard menu.

Choose the mouse for the system from the Mouse menu. If No Mouse is selected, no mouse is configured. If Probe for Mouse is selected, the installation program tries to automatically detect the mouse. Probing works for most modern mice.

If the system has a two-button mouse, a three-button mouse can be emulated by selecting Emulate 3 Buttons. If this option is selected, simultaneously clicking the left and right mouse buttons are recognized as a middle mouse button click.

From the Time Zone menu, choose the time zone to use for the system. To configure the system to use UTC, select Use UTC clock.

Enter the desired root password for the system in the Root Password text entry box. Type the same password in the Confirm Password text box. The second field is to make sure you do not mistype the password and then realize you do not know what it is after you have completed the installation. To save the password as an encrypted password in the file, select Encrypt root password. If the encryption option is selected, when the file is saved, the plain text password that you typed are encrypted and written to the kickstart file. Do not type an already encrypted password and select to encrypt it. Because a kickstart file is a plain text file that can be easily read, it is recommended that an encrypted password be used.

To install languages in addition to the one selected from the Default Language pulldown menu. check them in the Language Support list. The language selected from the Default Language pulldown menu is used by default after installation; however, the default can be changed with the Language Configuration Tool (system-config-language) after installation.

Choosing Target Architecture specifies which specific hardware architecture distribution is used during installation.

Choosing Reboot system after installation reboots your system automatically after the installation is finished.

Kickstart installations are performed in graphical mode by default. To override this default and use text mode instead, select the Perform installation in text mode option.

You can perform a kickstart installation in interactive mode. This means that the installation program uses all the options pre-configured in the kickstart file, but it allows you to preview the options in each screen before continuing to the next screen. To continue to the next screen, click the Next button after you have approved the settings or change them before continuing the installation. To select this type of installation, select the Perform installation in interactive mode option.